A stone fountain is a beautiful and serene addition to any home or garden. There’s something so calming and serene about a stone fountain.

Whether it’s the gentle trickle of water or the beautiful sound of running water, stone fountains can add a touch of elegance to any setting. But how do these amazing pieces of artwork work?

In this article, we’ll take a look at how stone fountains work and what you can do to keep yours in tip-top shape.

How Stone Fountains Are Made

Most stone fountains are made of cast stone, which is a type of concrete. The concrete is mixed with sand, water, and other additives to create a strong mixture that can be shaped into almost any form. Once the concrete is cast, it is left to cure for several days.

Once the concrete has cured, the craftsman will then add the finishing touches to the fountain. This may include painting, polishing, or adding other decorative elements. After the fountain has been finished, it is ready to be installed.

Installing a stone fountain is not as difficult as you may think. In most cases, all you need is a level surface on which to place the fountain.

If you are placing the fountain outdoors, you may need to dig a hole for the base of the fountain. Once the fountain is in place, all you need to do is fill it with water and plug it in.

How Do They Work?

A stone fountain is a water feature that uses a pump to circulate water through a series of pipes and back out into the basin. The water is then recirculated back to the pump, and the cycle repeats itself.


The most important part of a stone fountain is the pump. The pump must be powerful enough to move the water through the pipes and up to the nozzle, where it will be ejected into the air.

There are many different types of pumps that can be used in a stone fountain, but the most common is a submersible pump.

Submersible pumps are placed inside the basin of the fountain and are submerged in water. They are powered by an electric motor and have an impeller, or series of blades, that helps to move the water.

Once the water is pumped up to the nozzle, it is ejected into the air and falls back down into the basin below. The cycle then repeats itself, with the water being pumped back up and ejected once again.

Stone fountains can be a beautiful addition to any home or garden, and they are relatively easy to maintain. The most important thing to remember is to keep the pump clean and free of debris so that it can continue to circulate the water properly.

Different Types Of Stone Fountains

There are many different types of stone fountains available on the market. So, how do you know which one is right for you and your home?

Let‘s explore the different types of stone fountains and help you decide which one would be best for you:

1. Concrete Fountains

Concrete fountains are a popular choice for many homeowners. They are affordable and come in a variety of styles and sizes. Concrete fountains can be placed indoors or outdoors.

2. Granite Fountains

Granite fountains are a more expensive option, but they are also very durable. Granite fountains can last for many years with proper care.

They are also available in a variety of styles and sizes.

3. Marble Fountains

Marble fountains are a luxurious option. They are beautiful and come in a variety of styles and sizes. Marble fountains can last for many years with proper care.

4. Resin Fountains

Resin fountains are a lightweight and affordable option. They come in a variety of styles and sizes. Resin fountains can be placed indoors or outdoors.

5. Cast Stone Fountains

These are a type of ornamental fountains made from cast concrete. The term “cast stone” can refer to either the concrete used to make the fountain or the fountain itself.

Cast stone fountains are usually made to look like natural stone, but they can also be made in other styles. Many people buy a cast stone fountain because they are durable and easy to maintain.

How To Keep Your Fountains Maintained?

With a few simple tips, you can keep your fountain looking great for years to come.

1. Keep The Basin Clean

The basin of your fountain is where all the water collects, so it’s important to keep it clean. You can do this by emptying the basin and scrubbing it with mild detergent and a soft brush. Be sure to rinse the basin thoroughly afterward.

You should also clean the pump and any other moving parts. If your fountain has a lot of nooks and crannies, you may want to use a small toothbrush or paintbrush to get into all the crevices.

2. Remove Any Algae Or Build-Up

If you notice any algae or build-up on your fountain, you’ll want to remove it as soon as possible.

This can be done by scrubbing the affected areas with a stiff brush and some vinegar. Again, be sure to rinse thoroughly afterward.

3. Protect Your Fountain From The Elements

If your fountain is outdoors, it’s important to protect it from the elements. You can do this by covering it with a tarp or tarpaulin when it’s not in use.

This will help to keep dust and debris from collecting in the basin and prevent leaves and branches from falling into the water.

4. Add Fresh Water Regularly

It’s important to add fresh water to your fountain on a regular basis, especially if it’s located outdoors.

This will help to keep the water clean and free of stagnant build-up. If you live in an area with hard water, you may want to use distilled water in your fountain to prevent mineral deposits from forming.

5. Drain And Clean The Water On A Regular Basis

Even if you’re using fresh water, you should still drain and clean the fountain on a regular basis – at least once a week.

This will help to remove any dirt or debris that has been collected in the basin. To clean the fountain, simply empty out all the water and scrub the basin with mild detergent. Be sure to rinse well afterward!



Now that you know how stone fountains work, you can enjoy the beauty and serenity they bring to your home or garden.

Just be sure to give your regular fountain maintenance so it can continue to bring you joy for years to come.

DMCA.com Protection Status